 |
|
 |
Drivetrain |
|
|
| |
Xtreme/DTE C5 Diff Strut kit |
|
|
The DynoTech Engineering differential strut increases the overall strength and rigidity of the diff./trans. assembly as a whole and provides increased stability to the entire rear drivetrain. The steel brackets secured to the transmission bell-housing flange and around the differential case cover perimeter act as strengthening "girdles" that adds differential case and transmission bell housing flange rigidity for strength. These steel girdles spread the driveline shock loads over a greater surface area, therefore decreasing differential mounting flange cracks and transmission output shaft failures. The differential girdle incorporates a steel cross-strut rod that counteracts any possible deflection of the upper girdle by tying the two sides of the differential together, side-to-side. Each one of the four adjustable steel strut rods are secured to their respective girdle brackets by heavy duty, steel-ball Heim joints at both ends and each strut rod is independently adjustable to set pre-load of the entire assembly at all four corners. Available in Red only for the 97-04 Manual Transmission C5/Z06 Corvette. An Automatic transmission strut kit is now available. |
|
| |
| |
|
|
