 |
|
 |
Car Care |
|
|
|
|
Water Wetter Super coolant is a unique wetting agent for cooling systems which reduces coolant temperatures by as much as 30°F. This liquid product can be used to provide rust and corrosion protection in plain water for racing engines, which provides much better heat transfer properties than glycol-based antifreeze. Or it can be added to new or used antifreeze to improve the heat transfer of ethylene and propylene glycol systems. Designed for modern aluminum, cast iron, copper, brass, and bronze systems. |
|
|
| |
Red Line Synthetic Automatic Transmission Fluid |
|
|
Designed to provide excellent low-temperature shiftability and improved thermal stability. Synthetic ATF and Synthetic D4 ATF have better thermal stability and lower volatility characteristics than petroleum ATF and provide a much lower viscosity at lower temperatures, providing much quicker shifting in cold weather. The balanced frictional characteristics provide smooth and consistent shifts for extended drain intervals. The superior stability allows high-temperature operation while preventing transmission failure due to varnishing valves and clutches.
Synthetic ATF is an approved GM Dexron II, Ford Mercon, and Mercedes Benz Automatic Transmission Fluid and is suitable for GM, late model Ford, or any vehicle which recommends Dexron IID or Dexron IIE or Mercon for refill. |
|
|
| |
Redline Synthetic Engine Oils |
|
|
Red Line Synthetic Engine Oils are formulated specifically for street use in all kinds of passenger cars and light, medium and heavy trucks. Red Line Engine Oils outperform all petroleum-based oils and all other synthetics on the market today.
High-temperature stability makes Red Line Engine Oils a necessity for proper lubrication of high-performance engines, turbo-charged engines, heavily loaded truck engines or any engine that runs high engine oil temperature. Red Line is not just for high-performance and racing. Ordinary cars and trucks that see "daily driver" duty benefit greatly when their engines are lubricated with Red Line engine oils. More performance, better fuel economy and increased durability come with use of our oils in daily drivers.
Because of the robust polyester base stock and high-performance anticorrosive additive package in Red Line oils, they are ideal for use in street-driven vehicles at extended drain intervals. Red Line recommends oil changes for engines that are in good condition and do not see frequent starts without warm-ups or short-trips at between 10,000 and 18,000 miles for gasoline engines, 10,000 and 12,000 miles for diesel engines, or every 12 months, whichever is shorter. |
|
|
| |
Redline Synthetic Gear Oils |
|
|
Redline Synthetic Gear Oils are designed to provide the highest degree of protection and greatest efficiency for your drivetrain. Red Line provides a complete line of drivetrain lubricants which are optimized for differential, transmission, or transaxle use over a wide range of temperatures. The natural lubricity of the polyol esters provide excellent slipperiness which reduces the sliding friction in hypoid gears - reducing wear and significantly reducing temperatures.
75W90 GEAR OIL - recommended for most street driven and racing differentials. Excellent performance in conventional and limited-slip units. Also for limited-slip manual transaxles which require a 90 WT oil. Contains limited-slip friction modifiers.
75W90NS - recommended for manual transmissions and non-limited-slip transaxles that recommend 90 WT oils. Can be used in racing limited-slip units to increase lockup and reduce wheel spin. Street-driven rear-wheel drive cars should use regular Red Line 75W90 or 80W140. |
|
|
| |
Redline Complete Fuel System Cleaner |
|
|
Complete Fuel System Cleaner is a concentrated package of the most powerful high-temperature detergents available to clean gasoline fuel injectors and intake valves. Complete Fuel System Cleaner can clean injectors to nearly 100% efficiency in one treatment. The cleansing effect on injector deposits can raise fuel economy approximately 12% or even greater, depending on the condition of the injectors. Although many gasolines advertise injector cleanliness, GM presented a paper to the SAE which indicates that their customers encountered injector plugging with all major brands of gasoline (SAE 861533). Complete Fuel System Cleaner contains detergents and a synthetic upper cylinder lubricant which will help clean the intake valves, pollution control valves, combustion chamber deposits and carburetors. Complete Fuel System Cleaner also protects the fuel system from rust. One bottle treats up to 100 gallons. Safe for continual use. |
|
| |
| |
|
|
|
|
